Post Construction Cleaning

---

Our GTA Post Construction Cleaning – This is not your average clean — it’s a three-stage transformation. Designed for homes freshly built, renovated, or remodeled, our Post-Construction service removes fine dust, debris, residue, and surface buildup from every corner — safely, thoroughly, and with absolute precision.

 

Each clean builds on the last. From drywall dust to finishing flourishes, we align the environment to match the quality of the craftsmanship.

 

In some cases — especially for private homes or smaller projects — Phase 1 and 2 may be combined into a single service. Separate phases are most often reserved for larger developments or multi-stage builds.

 

PHASE 1: ROUGH CLEAN

Performed once major construction is complete and before finishes are installed.
Recommended prior to final paint, baseboard caulking, or touch-ups.

Includes:
Removal of large debris & packaging (non-hazardous)
↳ Client must supply bin or disposal; items must be under 20 lbs
Dry vacuuming of floors, baseboards & major dust areas
Surface dusting (walls, ledges, window tracks)
Sweep of stairs, porches, balconies, garages, and basement floors
Removal of tape, plastic, and protective coverings from fixtures
Basic wipe-down of windows, sills, doors, and frames
Vacuuming of duct/register openings (as far as accessible)
Optional: prep for builder paint/touch-ups

 

PHASE 2: DETAILED CLEAN

This is the deep clean — once painting is complete, all surfaces are in, and trades are finished.
Home must be powered, plumbed, and free of active work crews.

Includes:
Full dusting and vacuuming of all surfaces (walls, trim, ledges, light fixtures, cabinetry)
Clean inside & outside of all cabinets and drawers
Removal of paint splatter, caulking dust, adhesive residue (non-toxic areas)
↳ Not intended for heavy overspray or excess buildup — additional time may be required if conditions exceed standard scope
Clean windows (interior), mirrors, and glass partitions
Full wipe of doors, frames, baseboards, sills & switches
Deep floor clean – vacuum and mop all hard surfaces
Kitchen & bath: polish sinks, faucets, handles; clean countertops, backsplashes & fixtures
Appliance exteriors cleaned; protective films removed
Utility rooms: sweep and wipe HRVs, furnaces, water heaters (if exposed)
Garage sweep (if applicable)
Optional: sticker removal on windows and appliances

 

PHASE 3: FINAL CLEAN

Completed just before key handover or occupancy — after PDI and final touch-ups.
Polishing, perfecting, and preparing for client walkthrough or move-in.

Includes:
Final dusting of all surfaces
Light wipe of fingerprints or scuff marks (walls, doors, glass)
Re-clean floors for presentation finish
Touch-up vacuuming (under cabinets, stairs, corners)
Polish stainless steel, mirrors, and fixtures
Spot-check of all cabinetry and drawers
Fresh bathroom sanitation with “Clean & Sealed” toilet tags
Exterior entrance sweep (weather permitting)
Presentation-ready sparkle in all spaces

Additional final cleans requested between phases will be billed separately.

 

A Note on Pricing

All pricing is based on standard post-construction conditions.
Scope, size, debris levels, and site access may affect final cost.

We recommend sending clear photos or job notes in advance to ensure accuracy. If there is extensive buildup or material excess beyond the usual scope, additional charges may apply.

For high-volume clients — such as builders, project managers, or contractors — please contact us directly for a customized project quote.

 

 

You can book your GTA Post Construction Cleaning Services 24 hours a day on our booking page here.

---